You are here

Vestas

Vestas wind turbines and Vestas spare parts provide you with more than 30 years of proven experience in wind energy. Vestas has installed more than 54,000 wind turbines in 73 countries, generating more than 90 million MWh of energy per year.

Our selection of Vestas wind turbines

Vestas V44 0
Wind turbines
Vestas
4 pcs of Vestas V44, still in operation Can be delivered wit hubhigh from 40 to 60 m Valmet gears
Supplier: 
View supplier
Power kW: 
600
Hub Height: 
40.00
 Log in or register
to favorite for free
Vestas V29 0
Wind turbines
Vestas
7 pcs of Vestas V29 , still in operation, 30 m tube tower one section year 1996/97 Generators 3x400V and 3x 690 V
Supplier: 
View supplier
Power kW: 
225
Hub Height: 
30.00
 Log in or register
to favorite for free
Vestas V47 0
Wind turbines
Vestas
8 pcs Vestas V47, 40 - 50 m tube tower 2 sections, 3 x690 volt Year 1999 Dismantled
Supplier: 
View supplier
Power kW: 
660
Hub Height: 
45.00
 Log in or register
to favorite for free
Vestas V-34 (DWT WD-34) 400 kW 60 Hz 480 V (PRICE REDUCED/Updated Info) 0
Wind turbines
Vestas
Danish Wind Technologies (DWT) Model - WD-34 (later became Vestas V34) 400 kW 480 V 60 HZ Wind Turbine Variable Pitch turbine. THE PRICE IS FOR EACH TURBINE (not including the tower) - 15 Turbines Available Location: Palm Springs, California (two hours East of Los Angeles). We (Oct 14-Feb 15) decommissioned 21 V-34's (DWT WD-34) in a repower. Most turbines (16) were running when taken down. Turbines are in average or below average condition. We have a number of spare blades, gearboxes, tons of parts as the decision to repower was sudden based on availability of other turbines, and we had no intent of repowering. We are open to selling single units, groups, spare parts, spare nacelles, spare blades, spare generators etc. What is for sale is the complete top of the turbine, the Nacelle and Rotor. Also included are the down tower cables and Controller. ONLY 3 TOWERS are currently available 3 x 30 Meter (The towers are 1 complete section). ($9,000 USD each) No transformers are available. We have specially modified 80 ft shipping containers able to transport the blades (6 at a time) for sale as well as straps, foam and protection for those blades. They significantly save on transportation costs. $8,000 Each container. Turbines will may replacement Hydraulic Pumps. We have one interface box that is used to change parameters, run pitch tests etc. $5,000 THE TURBINES ARE AS IS-WHERE IS, NO WARRANTY, NO REPRESENTATIONS. Note: Shipping/Logistics: Nacelles will not fit in a Open Top Container. Turbines are available for pick up. We have a company on site, willing to assist in loading the units, but will charge Time and Materials for this work. The Tower is one 30 meter long section. We have full manuals in paper form (not electronic form). We have basic foundation drawings. We do not have turbine assembly accessories, except for one blade rack for single blade change outs. We will help with some phone or email support for 6 months to a year, if we are available. These turbines can be de-rated via the parameter settings. At these prices, you could buy multiple whole turbines for less than a cost of a new generator!
$15,000.00
Supplier: 
View supplier
Power kW: 
400
Hub Height: 
40.00
 Log in or register
to favorite for free
Vestas V-34 (DWT WD-34) 400 kW 60 Hz 480 V (PRICE REDUCED/Updated Info) 0
Wind turbines
Vestas
Danish Wind Technologies (DWT) Model - WD-34 (later became Vestas V34) 400 kW 480 V 60 HZ Wind Turbine Variable Pitch turbine. THE PRICE IS FOR EACH TURBINE (not including the tower) - 15 Turbines Available Location: Palm Springs, California (two hours East of Los Angeles). We (Oct 14-Feb 15) decommissioned 21 V-34's (DWT WD-34) in a repower. Most turbines (16) were running when taken down. Turbines are in average or below average condition. We have a number of spare blades, gearboxes, tons of parts as the decision to repower was sudden based on availability of other turbines, and we had no intent of repowering. We are open to selling single units, groups, spare parts, spare nacelles, spare blades, spare generators etc. What is for sale is the complete top of the turbine, the Nacelle and Rotor. Also included are the down tower cables and Controller. ONLY 3 TOWERS are currently available 3 x 30 Meter (The towers are 1 complete section). ($9,000 USD each) No transformers are available. We have specially modified 80 ft shipping containers able to transport the blades (6 at a time) for sale as well as straps, foam and protection for those blades. They significantly save on transportation costs. $8,000 Each container. Turbines will may replacement Hydraulic Pumps. We have one interface box that is used to change parameters, run pitch tests etc. $5,000 THE TURBINES ARE AS IS-WHERE IS, NO WARRANTY, NO REPRESENTATIONS. Note: Shipping/Logistics: Nacelles will not fit in a Open Top Container. Turbines are available for pick up. We have a company on site, willing to assist in loading the units, but will charge Time and Materials for this work. The Tower is one 30 meter long section. We have full manuals in paper form (not electronic form). We have basic foundation drawings. We do not have turbine assembly accessories, except for one blade rack for single blade change outs. We will help with some phone or email support for 6 months to a year, if we are available. These turbines can be de-rated via the parameter settings. At these prices, you could buy multiple whole turbines for less than a cost of a new generator!
$15,000.00
Supplier: 
View supplier
Power kW: 
400
Hub Height: 
40.00
 Log in or register
to favorite for free

Vestas wind turbines for sale

You find used and new Vestas wind turbines for sale on Spares in Motion, the trading platform for the wind turbine aftermarket. Our Vestas wind turbines for sale range from:

  • 55Kw – 8,000 Kw
  • new, refurbished to serviceable condition
  • 24 hrs – 4 wks availability

Vestas spare parts

Are you in need of Vestas parts, urgently or not? On Spares in Motion you find a vast range of cost-effective Vestas parts, like electrical, mechanical or hydraulic spare parts. We offer a wide range of spare parts for Vestas wind turbines including Vestas gearboxesVestas generators or Vestas rotor blades and control units offered by multiple vendors and in various conditions. 

Suppliers of Vestas spares find an additional sales channel on Spares in Motion. Through one single website you get into contact with potential buyers of Vestas components all over the world. Extend your business and find new customers for your spare parts. Read about how it works.

Our Vestas spares and supplies

All Vestas Parts
 

Vestas maintenance, repairs and service

Vestas maintenance, repairs and service keep your Vestas wind turbines and components in optimal condition. 

Vestas wind turbine maintenance

When your Vestas wind turbine requires repairs, you want them carried out quickly and preferably without extensive stock-keeping. Have you ever considered a virtual warehouse? Spares in Motion is a completely independent mediator and brings buyers and suppliers together for swift and solid Vestas maintenance.

Vestas turbine repairs

Spares in Motion helps you choose from many specialist repair shops for Vestas turbine component repairs. Swift and reliable engineers, ensuring the lowest possible downtime and longest service life. From Vestas wind turbine gearboxesVestas generators to Vestas CT modules: save costs by repairing instead of replacing your valuable Vestas parts.

Vestas wind turbine services

Next to maintenance and repairs, you find many other services to support your Vestas wind turbine during its total life cycle. From the selection of the best location for your Vestas wind turbine, via wind turbine inspectionsupgrades & modifications and consultancy to the erection and dismantling of your wind turbine, training and education and staffing.
 

More about Vestas

Vestas is the only energy company worldwide dedicated exclusively to wind energy. Wind is their business and their passion, as they claim. Vestas is a Danish company, founded in 1898 as a blacksmith shop. They started producing wind turbines in 1979 and have since become the largest wind energy company in the world.

Optimizing your Vestas wind turbine installation

Vestas has a true focus on generating the greatest and most sustainable return on wind for their customers. This counts for new installations just as well as for used installations. In order to optimize your Vestas installation, you have to consider all kinds of options and variables. If you need any assistance or a second opinion, you find wind energy specialists in various categories on Spares in Motion.

Vestas parts and service for future wind energy

Vestas predicts that by 2020 more than 10% of the world’s electricity consumption will be generated by wind energy. They have the data to support this claim and, what’s more, they have the confidence to say that wind power is an industry on par with coal and gas. Spares in Motion lets you find all Vestas parts, repairs and Vestas services needed to keep so many Vestas wind turbines up and running.