You are here

Need an Item That’s Not Listed?  Place Buying Request

Search results for Clipper Oil & Grease

Specific oil, grease and coating concentrates developed for the wind turbine industry. 

    • REWITEC DuraGear W100 Repair and Coating Concentrate for the wind turbine gearboxes
      Wind turbine parts
      Oil & Grease
      The use of DuraGear W100 will extend the life time of your wind turbine gearbox significantly resulting in lower maintenance costs. Using Gear W100 will result in a much smoother and more shiny teeth surface. The coated teeth surfaces had a significant higher electric resistance of about 150 Ω and the 3D topography analysis from NanoFocus AG with „µsurf“ technology confirms the equalization of the surface and the 18-times magnification of the load carrying tooth area. For more details please review the general Rewitec product presentation. Product Characteristics:- Reduction of friction in bearings and gears up to 33% *)- Decrease of temperature in bearings and gears up to 20% *)- Reduction of roughness on metal surfaces up to 50% *)- Reduction of wear and abrasion, as well as reconditioning of frictional metal surfaces- Prevention of pitting and grey staining- Lowering of vibrations and noise- Durable wear protection- Improvement of scuffing load capacity- Significant optimisation of primary material properties- Optimisation of lubrication film and emergency running properties in case of oil loss- Surface finishing during operating (without downtime)- Therefore reduction/prevention of costs of idleness- Reduction of spare parts demand- Extension of life-time of treated gears *) Tests on a 2-Disc-Test-Bench at the Competence Center Tribology at the University of Mannheim (Germany) 09/2012 Technical Data:- Name: REWITEC® Coating Concentrate- Colour: anthracite- Pourpoint:-12°C- Flashpoint: >245°C- Density at 20°C: 870 kg/m³- Solubility in water: no- Basic viscosity at 40°C: 68 mm²/s- Dosage: 1 bottle DuraGear® W100 per 100 ltr. oil volume DuraGear W100 is compatible with all kind of mineralic and syntactic oil, grease and lubricant varnish. DuraGear W100 is specially developed for wind turbine gearboxes and already used in all major wind turbines like the GE 1.5, Siemens 1,3, Repower 5M, and the Vestas wind turbine up to the V90. For more information on this wind turbine gear process please review our corporate presentation or contact Rewitec for more information. REWITEC DuraGear W100 Repair and Coating Concentrate for the wind turbine gearboxes Part manufacturer:  Rewitec GmbH Total units available:  100 Measurement unit:  pcs Expected lead time:  3d Product group:  Oil & Grease Wind turbine brand:  All Price:  1 590.00 Condition:  New
      €1,590.00
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • Order online
      Kluberplex AG-1 ultra
      Wind turbine parts
      Oil & Grease
      A01C02 Kluberplex AG-1 ultra Part number manufacturer:  Part manufacturer:  Klüber Lubrication Total units available:  4 Part number turbine manufacturer:  Measurement unit:  pcs Expected lead time:  24h Product group:  Oil & Grease Wind turbine brand:  All Price:  65.00 Condition:  New Warranty:  No Exchange components:  No
      €65.00
      Brand: 
      All
      Country: 
      Europe
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • Order online
      Shell Rhodina BBZ box of 12x400g
      Wind turbine parts
      Oil & Grease
      1306402153 Shell Rhodina BBZ box of 12x400g Part number manufacturer:  Part manufacturer:  SHELL Total units available:  4 Part number turbine manufacturer:  Measurement unit:  box Expected lead time:  24h Product group:  Oil & Grease Wind turbine brand:  All Price:  121.00 Condition:  New Warranty:  No Exchange components:  No
      €121.00
      Brand: 
      All
      Country: 
      Europe
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • Order online
      SKF bearing grease Lgwm1 12x400g
      Wind turbine parts
      Oil & Grease
      1201511560 SKF bearing grease Lgwm1 12x400g Part number manufacturer:  Part manufacturer:  SKF Total units available:  14 Part number turbine manufacturer:  Measurement unit:  box Expected lead time:  24h Product group:  Oil & Grease Wind turbine brand:  All Price:  121.00 Condition:  New Warranty:  No Exchange components:  No
      €121.00
      Brand: 
      All
      Country: 
      Europe
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • Order online
      Optimol Optipit yaw bearing grease 20x400g
      Wind turbine parts
      Oil & Grease
      1201511561 Optimol Optipit yaw bearing grease 20x400g Part number manufacturer:  Part manufacturer:  CASTROL Total units available:  2 Part number turbine manufacturer:  Measurement unit:  box Expected lead time:  24h Product group:  Oil & Grease Wind turbine brand:  All Price:  166.00 Condition:  New Warranty:  No Exchange components:  No
      €166.00
      Brand: 
      All
      Country: 
      Europe
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • Order online
      ACEITE BESLUX SINCART W ROJO (BIDON 50L)
      Wind turbine parts
      Oil & Grease
      Aceites sintéticos (PAG) de larga duración y elevadas prestaciones. Excelentes propiedades antidesgaste, gran estabilidad a la oxidación, bajo punto de congelación, inertes frente a materiales metálicos, incluso con aleaciones de aluminio y cobre. Muy resistente al cizallamiento mecánico. Presentan muy buen comportamiento viscosidad-temperatura. Temperaturas operativas a +200ºC. Muy estables al envejecimiento (muy larga vida útil). Muy bajos coeficientes de fricción, incluso con contaminaciones de agua hasta un 1%, adecuado para reductores y otros mecanismos expuestos a entornos con un alto nivel de humedad. Aplicaciones: Poliglicoles para lubricación de por vida de cajas de engranajes, sinfin y corona y en reductores a muy altas o bajas temperaturas. Engranajes, sinfines, sistemas de circulación, rodamientos, cojinetes lisos y cadenas. ACEITE BESLUX SINCART W ROJO (BIDON 50L) Total units available:  500 Measurement unit:  l Expected lead time:  3d Product group:  Oil & Grease Wind turbine brand:  Various Price:  5.49 Condition:  New Warranty:  No Exchange components:  No
      €5.49
      Brand: 
      Various
      Country: 
      Europe
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • Order online
      Kluberbemi 41-132
      Wind turbine parts
      Oil & Grease
      B01A04 Kluberbemi 41-132 Part number manufacturer:  Part manufacturer:  Klüber Lubrication Total units available:  11 Part number turbine manufacturer:  Measurement unit:  pcs Expected lead time:  24h Product group:  Oil & Grease Wind turbine brand:  All Price:  20.00 Condition:  New Warranty:  No Exchange components:  No
      €20.00
      Brand: 
      All
      Country: 
      Europe
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • Order online
      AEROSOL GRASA TEFF LIQUIDA
      Wind turbine parts
      Oil & Grease
      22109
      AEROSOL GRASA TEFF LIQUIDA Part number manufacturer:  22109 Part manufacturer:  FERRETERÍA IRIGARAY, S.L. Total units available:  1500 Part number turbine manufacturer:  Measurement unit:  pcs Expected lead time:  3d Product group:  Oil & Grease Wind turbine brand:  Various Price:  22.36 Condition:  New Warranty:  No Exchange components:  No
      €22.36
      Brand: 
      Various
      Country: 
      Europe
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • Order online
      GRASA (BOTE 1KG)
      Wind turbine parts
      Oil & Grease
      149162
      GE's part number: T85220100000, Acciona: 1005891 GRASA (BOTE 1KG) Part number manufacturer:  149162 Part manufacturer:  GAMESA EÓLICA, S.L. Total units available:  542 Part number turbine manufacturer:  1005891, T85220100000 Measurement unit:  kg Expected lead time:  3d Product group:  Oil & Grease Wind turbine brand:  Various Price:  6.47 Condition:  New Warranty:  No Exchange components:  No
      €6.47
      Brand: 
      Various
      Country: 
      Europe
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • Perma CLASSIC
      Wind turbine parts
      Oil & Grease
      perma CLASSIC can be used for all applications with ambient temperatures of 0 to +40 °C. Depending on your application's requirement, you may choose to discharge 120 cm³ in a period of 1, 3, 6 or 12 months. The realiable operating principle is based on a electrochemical reaction. The activator screw is crewed into the lubrication system and the eyelet is torn off. The included gas generator generates pressure (max. 4 bar) which moves the piston forward and continuously injects small lubricant amounts into the lubrication point. The product is available with the following lubricants: perma CLASSIC with Klüberplex BEM 41-132 (Art. No.: 100275) perma CLASSIC with Klüberplex BEM 41-141 (Art. No.: 103852) perma CLASSIC with Klüberplex BEM 41-141 M (Art. No.: 103859) perma CLASSIC with Klüberplex AG 11-461 (Art. No.: On request) perma CLASSIC with MOBILGEAR OGL 461 (Art. No.: 100163) perma CLASSIC with MOBIL SHC GREASE 460 WT (Art. No.: 100307) perma CLASSIC with MOBILTEMP SHC 100 (Art. No.: 100130) perma CLASSIC with Shell Rhodina Grease BBZ (Art. No.: 103848) perma CLASSIC with Shell Gadus S2 V220 2 (Art. No.: 108380) perma CLASSIC with Shell Gadus S3 V460D 2 (Art. No.: 112491) perma CLASSIC with Tribol GR 1350-2.5 PD (Art. No.: 111811) perma CLASSIC with perma Multipurpose grease SF01 (Art. No.: 100020) perma CLASSIC with perma Extreme pressure grease SF02 (Art. No.: 100034) Perma CLASSIC Part manufacturer:  PERMA Total units available:  1000 Measurement unit:  pcs Expected lead time:  request Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • REWITEC GR400, High-temperature repair and coating grease for gears and bearings
      Wind turbine parts
      Oil & Grease
      REWITEC GR400 is a Synthetic high-temperature coating grease for all kind of gears and bearings (main, pitch, yaw). Using REWTIC GR400 extend the life time of your bearings resulting in lower maintenance cost and a higher availability of your wind turbine. REWITEC® is developer, manufacturer and distributor of active ingredients on nano and micro bases for surface refinements, which are used to reduce friction and wear on metal surfaces in tribologic systems. Technical Data of REWTIC GR400:- Description: Synthetic high-temperature coating- grease for all kind of bearings- Colour: grey- Consistency grade (NLGI): 2- Base oil: PAO with anorganic thickener- Density at 20°C: 880 kg/m³- Viscosity base fluid at 40°C: 460 mm²/s- Temperature range:-50 till +200°C- Temperature range (short term): till +220°C- Oxidation resistance (100h 99°C): 250°C Product Characteristics:- Reduction of friction up to 33% *)- Decrease of temperature up to 20% *)- Reduction of roughness on metal surfaces up to 50% *)- Reduction of wear and abrasion, as well as reconditioning of frictional metal surfaces- Good corrosion prevention and durable wear protection- Very good adhesion and water resistance- Excellent load-carrying capacity- Prevention of pitting and grey staining- Lowering of vibrations and noise- Improvement of scuffing load capacity- Significant optimisation of primary material properties- Optimisation of lubrication film and emergency running properties in case of oil loss- Therefore reduction/prevention of costs of idleness- Reduction of spare parts demand- Extension of life-time of treated bearings *) Tests on a 2-Disc-Test-Bench at the Competence Center Tribology at the University of Mannheim (Germany) 09/2012 For more information on REWTEC or on our products please download our company presentation and product presentation. You can also contact Rewitec by phone or send a message. REWITEC GR400, High-temperature repair and coating grease for gears and bearings Part manufacturer:  Rewitec GmbH Total units available:  100 Measurement unit:  pcs Expected lead time:  3d Product group:  Oil & Grease Wind turbine brand:  All Condition:  New Warranty:  No
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • Pressure booster simalube IMPULSE (10 bar / 145 psi) to simalube lubricator
      Wind turbine parts
      Oil & Grease
      The simalube IMPULSE ensures reliable lubrication in situations with high counterpressure and long lubrication lines. With the automatic simalube lubricators, this pressure booster pumps greases and oils at up to 10 bar to the targeted lubrication point. The LED display of the intelligent pressure booster provides information continuously about the current operating condition, and flashes green when the device is functioning correctly. Specifications Drive system Electromechanical Power supply Battery pack, 6 V 2.3 Ah Function display LED status display (green/red every 10 seconds) Lubricant Grease up to NLGI 2 or oil Installation position Any ests/Approvals CE, IP68 Further information https://simatec.com/products/simalube-accessories/simalube-impulse/ simalube lubricators https://simatec.com/products/simalube-lubricator/ Pressure booster simalube IMPULSE (10 bar / 145 psi) to simalube lubricator Part manufacturer:  simatec Switzerland Total units available:  1200 Measurement unit:  pcs Expected lead time:  request Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Europe
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • Automatic lubrication 15 ml simalube (single-point lubricator)
      Wind turbine parts
      Oil & Grease
      The simalube automatic lubricant dispenser can be used in all types of wind turbines both in operation and during the production process. Specifications Size 15 ml (also in range: 30, 60, 125 and 250 ml) Working pressure Up to 5 bar / 72.5 psi (or up to 10 bar / 145 psi with simalube IMPULSE booster) Running time 1-12 months continuously adjustable Operating temperature-20°C to 55°C /-4°F to 133°F ambient temperature Refillable Yes Tests/Approvals CE, IP68, TÜV, EX Lubricant a) Empty available: for own filling with oil or grease b) Filling by manufacturer with own oil or grease c) Selection of lubricants from standard range: https://simatec.com/products/simalube-lubricator/lubricants/ Installation Accessories for all installations: https://simatec.com/products/simalube-accessories/accessories/ Further information https://simatec.com/products/simalube-lubricator/ Automatic lubrication 15 ml simalube (single-point lubricator) Part manufacturer:  simatec Switzerland Total units available:  12000 Measurement unit:  box Expected lead time:  request Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Europe
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • Automatic lubrication 125 ml simalube (single-point lubricator)
      Wind turbine parts
      Oil & Grease
      The simalube automatic lubricant dispenser can be used in all types of wind turbines both in operation and during the production process. Specifications Size 125 ml (also in range: 15, 30, 60 or 250 ml) Working pressure Up to 5 bar / 72.5 psi (or up to 10 bar / 145 psi with simalube IMPULSE booster) Running time 1-12 months continuously adjustable Operating temperature-20°C to 55°C /-4°F to 133°F ambient temperature Refillable Yes Tests/Approvals CE, IP68, TÜV, EX Lubricant a) Empty available: for own filling with oil or grease b) Filling by manufacturer with own oil or grease c) Selection of lubricants from standard assortment: https://simatec.com/products/simalube-lubricator/lubricants/ Installation Accessories for all installations: https://simatec.com/products/simalube-accessories/accessories/ Further information https://simatec.com/products/simalube-lubricator/ Automatic lubrication 125 ml simalube (single-point lubricator) Part manufacturer:  simatec Switzerland Total units available:  12000 Measurement unit:  box Expected lead time:  request Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Europe
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • Automatic lubrication 60 ml simalube (single-point lubricator)
      Wind turbine parts
      Oil & Grease
      simatec Switzerland
      The simalube automatic lubricant dispenser can be used in all types of wind turbines both in operation and during the production process. Specifications Size 60 ml (also in range: 15, 30, 125 and 250 ml) Working pressure Up to 5 bar / 72.5 psi (or up to 10 bar / 145 psi with simalube IMPULSE booster) Running time 1-12 months continuously adjustable Operating temperature-20°C to 55°C /-4°F to 133°F ambient temperature Refillable Yes Tests/Approvals CE, IP68, TÜV, EX Lubricant a) Empty available: for own filling with oil or grease b) Filling by manufacturer with own oil or grease c) Selection of lubricants from standard range: https://simatec.com/products/simalube-lubricator/lubricants/ Installation Accessories for all installations: https://simatec.com/products/simalube-accessories/accessories/ Further information https://simatec.com/products/simalube-lubricator/ Automatic lubrication 60 ml simalube (single-point lubricator) Part number manufacturer:  simatec Switzerland Total units available:  12000 Measurement unit:  box Expected lead time:  request Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Europe
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • Automatic lubrication 30 ml simalube (single-point lubricator)
      Wind turbine parts
      Oil & Grease
      The simalube automatic lubricant dispenser can be used in all types of wind turbines both in operation and during the production process. Specifications Size 30 ml (also in range: 15, 60, 125 and 250 ml) Working pressure Up to 5 bar / 72.5 psi (or up to 10 bar / 145 psi with simalube IMPULSE booster) Running time 1-12 months continuously adjustable Operating temperature-20°C to 55°C /-4°F to 133°F ambient temperature Refillable Yes Tests/Approvals CE, IP68, TÜV, EX Lubricant a) Empty available: for own filling with oil or grease b) Filling by manufacturer with own oil or grease c) Selection of lubricants from standard range: https://simatec.com/products/simalube-lubricator/lubricants/ Installation Accessories for all installations: https://simatec.com/products/simalube-accessories/accessories/ Further information https://simatec.com/products/simalube-lubricator/ Automatic lubrication 30 ml simalube (single-point lubricator) Part manufacturer:  simatec Switzerland Total units available:  12000 Measurement unit:  box Expected lead time:  request Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Europe
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • Automatic lubrication 250 ml simalube (single-point lubricator)
      Wind turbine parts
      Oil & Grease
      simatec Switzerland
      The simalube automatic lubricant dispenser can be used in all types of wind turbines both in operation and during the production process. Specifications Size 250 ml (also in range: 15, 30, 60, and 125 ml) Working pressure Up to 5 bar / 72.5 psi (or up to 10 bar / 145 psi with simalube IMPULSE booster) Running time 1-12 months continuously adjustable Operating temperature-20°C to 55°C /-4°F to 133°F ambient temperature Refillable Yes Tests/Approvals CE, IP68, TÜV, EX Lubricant a) Empty available: for own filling with oil or grease b) Filling by manufacturer with own oil or grease c) Selection of lubricants from standard range: https://simatec.com/products/simalube-lubricator/lubricants/ Installation Accessories for all installations: https://simatec.com/products/simalube-accessories/accessories/ Further information https://simatec.com/products/simalube-lubricator/ Automatic lubrication 250 ml simalube (single-point lubricator) Part number manufacturer:  simatec Switzerland Total units available:  12000 Measurement unit:  box Expected lead time:  request Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Europe
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • perma grease 5 kg bellow
      Wind turbine parts
      Oil & Grease
      The product is available with the following lubricants: perma 5 kg grease bellow mit Klüberplex BEM 41-132 (Art. No.: On request) perma 5 kg grease bellow mit Klüberplex BEM 41-141 (Art. No.: 107528) perma 5 kg grease bellow mit Klüberplex BEM 41-141 M (Art. No.: On request) perma 5 kg grease bellow mit Klüberplex AG 11-461 (Art. No.: 112563) perma 5 kg grease bellow mit MOBILGEAR OGL 461 (Art. No.: On request) perma 5 kg grease bellow mit MOBIL SHC GREASE 460 WT (Art. No.: 107527) perma 5 kg grease bellow mit MOBILTEMP SHC 100 (Art. No.: On request) perma 5 kg grease bellow mit Shell Rhodina Grease BBZ (Art. No.: 113358) perma 5 kg grease bellow mit Shell Gadus S2 V220 2 (Art. No.: On request) perma 5 kg grease bellow mit Shell Gadus S3 V460D 2 (Art. No.: On request) perma 5 kg grease bellow mit Tribol GR 1350-2.5 PD (Art. No.: On request) perma 5 kg grease bellow mit perma Multipurpose grease SF01 (Art. No.: On request) perma 5 kg grease bellow mit perma Extreme pressure grease SF02 (Art. No.: On request) perma grease 5 kg bellow Part manufacturer:  PERMA Total units available:  1000 Measurement unit:  pcs Expected lead time:  request Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • perma FLEX 60
      Wind turbine parts
      Oil & Grease
      perma FLEX is a compact, ready-to-use lubrication system supplied as a complete unit. It can be used in various types of applications at temperatures ranging from-20 °C to +60 °C. Discharge period setting is freely adjustable from 1 to 12 months.The required pressure is developed via an electronically controlled chemical reaction. The lubrication point is continuously supplied with fresh lubricant throughout the selected discharge period. perma FLEX is available in sizes 60 cm³ and 125 cm³. The product is available with the following lubricants: perma FLEX 60 with Klüberplex BEM 41-132 (Art. No.: On request) perma FLEX 60 with Klüberplex BEM 41-141 (Art. No.: On request) perma FLEX 60 with Klüberplex BEM 41-141 M (Art. No.: On request) perma FLEX 60 with Klüberplex AG 11-461 (Art. No.: 113474) perma FLEX 60 with MOBILGEAR OGL 461 (Art. No.: On request) perma FLEX 60 with MOBIL SHC GREASE 460 WT (Art. No.: On request) perma FLEX 60 with MOBILTEMP SHC 100 (Art. No.: 107237) perma FLEX 60 with Shell Rhodina Grease BBZ (Art. No.: 111820) perma FLEX 60 with Shell Gadus S2 V220 2 (Art. No.: 108447) perma FLEX 60 with Shell Gadus S3 V460D 2 (Art. No.: On request) perma FLEX 60 with Tribol GR 1350-2.5 PD (Art. No.: On request) perma FLEX 60 with perma Multipurpose grease SF01 (Art. No.: 107224) perma FLEX 60 with perma Extreme pressure grease SF02 (Art. No.: 107226) perma FLEX 60 Part manufacturer:  PERMA Total units available:  1000 Measurement unit:  pcs Expected lead time:  request Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       Log in or register
      to favorite for free
    • perma PRO LC 500
      Wind turbine parts
      Oil & Grease
      The product is available with the following lubricants: perma PRO LC 500 with Klüberplex BEM 41-132 (Art. No.: 106797) perma PRO LC 500 with Klüberplex BEM 41-141 (Art. No.: 106858) perma PRO LC 500 with Klüberplex BEM 41-141 M (Art. No.: 109511) perma PRO LC 500 with Klüberplex AG 11-461 (Art. No.: 109099) perma PRO LC 500 with MOBILGEAR OGL 461 (Art. No.: On request) perma PRO LC 500 with MOBIL SHC GREASE 460 WT (Art. No.: 106808) perma PRO LC 500 with MOBILTEMP SHC 100 (Art. No.: 106768) perma PRO LC 500 with Shell Rhodina Grease BBZ (Art. No.: On request) perma PRO LC 500 with Shell Gadus S2 V220 2 (Art. No.: 108514) perma PRO LC 500 with Shell Gadus S3 V460D 2 (Art. No.: On request) perma PRO LC 500 with Tribol GR 1350-2.5 PD (Art. No.: On request) perma PRO LC 500 with perma Multipurpose grease SF01 (Art. No.: 106753) perma PRO LC 500 with perma Extreme pressure grease SF02 (Art. No.: 106754) perma PRO LC 500 Part manufacturer:  PERMA Total units available:  1000 Measurement unit:  pcs Expected lead time:  request Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       Log in or register
      to favorite for free

Pages